Caution_Tempered Glass Jig2

Tempered Glass Film

iPhone

Tempered Glass Film

Standard
Privacy

QR Floating Start

Caution

Please check the product's color, size, and device model before placing your order.

Product images and sizes may differ from actual products.

We are not responsible for any damages or breakage, including but not limited to smart devices, or personal injury that occurs during the installation, use, or removal of this product.

It is recommended that this product be used only for its intended purpose. If the product is damaged or deformed during use, immediately stop using it and discard it.

Installing this product does not guarantee that the screen will never break, and shards of glass may scatter if damaged.

The anti-shatter treatment is applied to the inner side of the tempered glass.

Before applying tempered glass onto the surface, wipe off the liquid crystal surface to remove foreign substances such as dust or oil to ensure proper application.

iFace Tempered Glass has been designed to fit iFace cases. Other 3rd party cases may not be compatible with iFace Tempered Glass.

Please be aware that continuously wipe the tempered glass surface with alcohol, such as an alcohol swab, the oleophobic coating (anti-fingerprint coating) on the tempered glass surface may peel off.

Please refer to the installation guide or video to ensure the film tab is aligned with the designated position. Improper alignment may result in unsuccessful attachment.

Product specifications are subject to change without prior notice.

After the product package has been opened, any exchange or refund of the product is not allowed.

As this product is shipped internationally from South Korea, it may be subject to duties and taxes imposed by the destination country.

For further details, please refer here and Chat with us on iFace.com

All trademarks are the property of their respective owners.

How to use

How to assemble

1
Be sure to use the ‘dust removal sticker’, ‘microfiber cloth’ and ‘alcohol cleaner’ included in the kit to remove dirt and dust from the screen.
2
Place the sponge below the camera area to prevent interference, then gently set the device on top.
3
Align the top and bottom of the frame with the device, then press down firmly until it clicks into place.
4
Hold the bottom of the frame and slowly pull out the film by the tab.
Refer to the image below and check that the film (index tab) is correctly positioned above the bump.
If it appears as shown in the NG image, there is a risk of incorrect installation.
5
Rub 2-3 times along the direction shown on the film to help the tempered glass securely attach to the device. Please wait approximately 20 seconds for it to fully adhere to the screen.
6
Lift the top of the frame and gently press the center of the film.
7
Slowly remove the frame. The film and jig will detach, leaving only the tempered glass on the screen.
8
In case of large bubbles, use gentle pressure to guide them toward the edges until they disappear. Any small bubbles that remain will typically disappear on their own within 24 hours.